-
600w sun conder Monocrystalline R1 680,00 -
N Energy 24V 120Ah battery R7 995,00 -
Sinotec 5.1 kWh battery R13 800,00 -
14.34 kWh 280ah SUN battery R28 995,00 -
5.76 kWh battery N Energy R14 700,00
Recent Products
-
-
Comparehe “Conderenergy 600W Solar Panel Mono” is a specific model of high-efficiency monocrystalline solar panel. The term “mono” signifies that it is made from monocrystalline silicon, a technology known for its high efficiency and a sleek, uniform black appearance.
Here are the detailed specifications for the Conderenergy 600W solar panel:
Electrical Specifications (at STC: Standard Test Conditions)
- Rated Maximum Power (Pmax): 600W
- Voltage at Pmax (Vmp): 43.6V
- Current at Pmax (Imp): 13.74A
- Open-Circuit Voltage (Voc): 51.84V
- Short-Circuit Current (Isc): 14.55A
- Module Efficiency: A high efficiency rating, often over 21%.
- Maximum Series Fuse Rating: 25A
- Maximum System Voltage: 1500V DC
Mechanical and Physical Specifications
- Cell Type: Monocrystalline Silicon
- Frame: Anodized aluminum alloy, providing durability and a long lifespan.
- Dimensions (L x W x H): 2278 x 1134 x 30 mm
- Weight: Approximately 32 kg
- Connector: Typically comes with standard MC4 connectors.
Additional Features and Certifications
- Durability: The panel is built to withstand harsh environmental conditions, including high wind and snow loads.
- Temperature Performance: Designed to perform well in various temperature ranges, with a low-temperature coefficient to minimize power loss in hot weather.
- Warranty: (e25 years), guaranteeing a minimum power output over time.
R1 680,00
-
-
-
-
CompareGeneral Specifications
- Model: VB5KWH
- Battery Type: Lithium Iron Phosphate (LiFePO4)
- Nominal Battery Energy: 5.12 kWh
- Nominal Capacity: 100 Ah (Amp-hours)
- Nominal Voltage: 51.2V DC
Electrical and Performance
- Recommended Charge/Discharge Current: 100A
- Maximum Continuous Charge/Discharge Current: 100A
- Peak Power Charge/Discharge Current: 200A (for 5 seconds)
- Charging Cut-off Voltage: 57.6V
- Discharging End-off Voltage: 40V
- Cycle Life: A calendar life of over 5,000 cycles is typically advertised, which equates to a lifespan of 10+ years under normal usage.
- Scalability: Supports up to 16 units in parallel, allowing for flexible capacity expansion.
Physical and Environmental
- Dimensions (W x D x H): 480 x 460 x 155.5 mm
- Weight: 45 kg
- Ingress Protection (IP) Rating: IP20 (designed for indoor use)
- Charging Temperature Range: 0°C to 50°C
- Discharging Temperature Range: -20°C to 60°C
Communication and Compatibility
- Communication Ports: CAN bus and RS485, which are standard for communicating with inverters.
- Battery Management System (BMS): A built-in BMS provides essential protection against overcharging, over-discharging, over-current, and temperature issues.
- Compatible Inverters: The battery is compatible with most mainstream inverter brands, including Victron, SMA, Goodwe, Imeon, Solis, SAJ, Growatt, Luxpower, Voltronic, and Deye.
R13 800,00
-
-
-
-
-
Compare- Powerful: 8.5KVA/7.5KW pure sine wave output.
- Efficient: 120A MPPT charge controller, 500V high voltage PV input.
- Reliable: 48V battery system, seamless hybrid operation.
R8 995,00
-
-
-
CompareKey Features
- Hybrid Functionality: This inverter is designed to manage power from three sources: solar panels (PV), a battery bank, and the public grid. It can prioritize solar energy to power a home or business, charge a battery, and then use the grid as a backup or to sell excess energy back to the grid (if allowed by local regulations).
- Pure Sine Wave Output: It produces a high-quality, pure sine wave AC output, which is essential for safely and efficiently powering sensitive electronics and appliances.
- Dual MPPT: It typically features two Maximum Power Point Trackers (MPPTs). This allows for two separate strings of solar panels, each with its own optimal performance tracking. This is beneficial for roofs with different orientations or shading.
- Battery Compatibility: The inverter is designed to be compatible with a variety of battery types, most commonly 48V Lithium-ion batteries (LiFePO4) but sometimes also lead-acid batteries. The Battery Management System (BMS) in the battery and inverter communicate to ensure safe and efficient charging and discharging.
- Monitoring and Control: Most modern hybrid inverters include Wi-Fi or GPRS connectivity, allowing users to monitor the system’s performance, energy usage, and battery status remotely via a mobile app or web portal.
- Safety Features: The inverter includes multiple layers of protection, such as over-temperature, overload, and short-circuit protection. It’s often rated with an IP65 protection degree, making it suitable for outdoor installation.
Typical Technical Specifications (for a 6kW model)
Solar (PV) Input Data:
- Max. PV Power: This is often higher than the nominal output to allow for optimal performance on sunny days. A common value is around 8000W.
- MPPT Voltage Range: The voltage range within which the inverter can efficiently track the maximum power point of the solar panels. A typical range is 120-450V.
- Max. PV Input Voltage: The absolute maximum voltage the inverter can handle, often around 500V.
AC Output/Input Data:
- Nominal Output Power: 6000W (or 6 kVA). This is the continuous power the inverter can supply.
- Nominal Output Voltage: 230V AC (single-phase).
- Nominal Output Frequency: 50 Hz.
- Max. AC Input/Output Current: This depends on the specific model but is typically around 25-30A.
- Efficiency: The maximum efficiency is usually over 97% for the inverter itself and around 94% for battery-to-load conversion.
Battery Data:
- Nominal Battery Voltage: 48V DC.
- Max. Charging/Discharging Current: Can be up to 100A or more, depending on the model.
Physical and Environmental:
- Dimensions and Weight: These vary, but the inverter is typically a wall-mountable unit. Weights are in the range of 15-20 kg.
- Operating Temperature Range: Often between -20°C and 50°C.
R9 995,00
-
-
-
Compare10.2KWH Hybrid Inverter
14.34kwh Lithium Battery
X12 550/600w solar panels
Installation mounting accessories
-Ac breaker
-solar combine box
-roof hooks
-Ac cable
-Tracken
-Rails
-solar cable
-ac cableInstallation
-Mounting solar panels f
-Mounting inverter and battery
-Feeding and separating the dB box
-cocR74 995,00
-
-
-
CompareX2 10.2KWH Hybrid Inverter
X2 14.34kwh Lithium Battery
X24 550/600w solar panels
Installation mounting accessories
-Ac breaker
-solar combine box
-roof hooks
-Ac cable
-Tracken
-Rails
-solar cable
-ac cableInstallation
-Mounting solar panels f
-Mounting inverter and battery
-Feeding and separating the dB box
-cocR132 995,00
-
-
-
Compare10.2kwh Hybrid Inverter
5.1kwh Lithium Battery
X7 550/600w solar panels
Installation mounting accessories
-Ac breaker
-solar combine box
-roof hooks
-Ac cable
-Tracken
-Rails
-solar cable
-ac cableInstallation
-Mounting solar panels f
-Mounting inverter and battery
-Feeding and separating the dB box
-cocR48 995,00
-
-
-
Compare8.5kva Hybrid Inverter
5.1kwh Lithium Battery
X6 550/600w solar panels
Installation mounting accessories
-Ac breaker
-solar combine box
-roof hooks
-Ac cable
-Tracken
-Rails
-solar cable
-ac cableInstallation
-Mounting solar panels f
-Mounting inverter and battery
-Feeding and separating the dB box
-cocR39 995,00
-
-
-
Compare15kwh deye Hybrid Inverter
14.34kwh Lithium Battery
X16 550/600w solar panels
Installation mounting accessories
-Ac breaker
-solar combine box
-roof hooks
-Ac cable
-Tracken
-Rails
-solar cable
-ac cableInstallation
-Mounting solar panels f
-Mounting inverter and battery
-Feeding and separating the dB box
-cocR118 995,00
-
New Arrivals
-
-
Compare
he “Conderenergy 600W Solar Panel Mono” is a specific model of high-efficiency monocrystalline solar panel. The term “mono” signifies that it is made from monocrystalline silicon, a technology known for its high efficiency and a sleek, uniform black appearance.
Here are the detailed specifications for the Conderenergy 600W solar panel:
Electrical Specifications (at STC: Standard Test Conditions)
- Rated Maximum Power (Pmax): 600W
- Voltage at Pmax (Vmp): 43.6V
- Current at Pmax (Imp): 13.74A
- Open-Circuit Voltage (Voc): 51.84V
- Short-Circuit Current (Isc): 14.55A
- Module Efficiency: A high efficiency rating, often over 21%.
- Maximum Series Fuse Rating: 25A
- Maximum System Voltage: 1500V DC
Mechanical and Physical Specifications
- Cell Type: Monocrystalline Silicon
- Frame: Anodized aluminum alloy, providing durability and a long lifespan.
- Dimensions (L x W x H): 2278 x 1134 x 30 mm
- Weight: Approximately 32 kg
- Connector: Typically comes with standard MC4 connectors.
Additional Features and Certifications
- Durability: The panel is built to withstand harsh environmental conditions, including high wind and snow loads.
- Temperature Performance: Designed to perform well in various temperature ranges, with a low-temperature coefficient to minimize power loss in hot weather.
- Warranty: (e25 years), guaranteeing a minimum power output over time.
R1 680,00
-
-
-
Compare
General Specifications
- Model: VB5KWH
- Battery Type: Lithium Iron Phosphate (LiFePO4)
- Nominal Battery Energy: 5.12 kWh
- Nominal Capacity: 100 Ah (Amp-hours)
- Nominal Voltage: 51.2V DC
Electrical and Performance
- Recommended Charge/Discharge Current: 100A
- Maximum Continuous Charge/Discharge Current: 100A
- Peak Power Charge/Discharge Current: 200A (for 5 seconds)
- Charging Cut-off Voltage: 57.6V
- Discharging End-off Voltage: 40V
- Cycle Life: A calendar life of over 5,000 cycles is typically advertised, which equates to a lifespan of 10+ years under normal usage.
- Scalability: Supports up to 16 units in parallel, allowing for flexible capacity expansion.
Physical and Environmental
- Dimensions (W x D x H): 480 x 460 x 155.5 mm
- Weight: 45 kg
- Ingress Protection (IP) Rating: IP20 (designed for indoor use)
- Charging Temperature Range: 0°C to 50°C
- Discharging Temperature Range: -20°C to 60°C
Communication and Compatibility
- Communication Ports: CAN bus and RS485, which are standard for communicating with inverters.
- Battery Management System (BMS): A built-in BMS provides essential protection against overcharging, over-discharging, over-current, and temperature issues.
- Compatible Inverters: The battery is compatible with most mainstream inverter brands, including Victron, SMA, Goodwe, Imeon, Solis, SAJ, Growatt, Luxpower, Voltronic, and Deye.
R13 800,00
-
-
-
Compare
- Powerful: 8.5KVA/7.5KW pure sine wave output.
- Efficient: 120A MPPT charge controller, 500V high voltage PV input.
- Reliable: 48V battery system, seamless hybrid operation.
R8 995,00
-
-
Compare
Key Features
- Hybrid Functionality: This inverter is designed to manage power from three sources: solar panels (PV), a battery bank, and the public grid. It can prioritize solar energy to power a home or business, charge a battery, and then use the grid as a backup or to sell excess energy back to the grid (if allowed by local regulations).
- Pure Sine Wave Output: It produces a high-quality, pure sine wave AC output, which is essential for safely and efficiently powering sensitive electronics and appliances.
- Dual MPPT: It typically features two Maximum Power Point Trackers (MPPTs). This allows for two separate strings of solar panels, each with its own optimal performance tracking. This is beneficial for roofs with different orientations or shading.
- Battery Compatibility: The inverter is designed to be compatible with a variety of battery types, most commonly 48V Lithium-ion batteries (LiFePO4) but sometimes also lead-acid batteries. The Battery Management System (BMS) in the battery and inverter communicate to ensure safe and efficient charging and discharging.
- Monitoring and Control: Most modern hybrid inverters include Wi-Fi or GPRS connectivity, allowing users to monitor the system’s performance, energy usage, and battery status remotely via a mobile app or web portal.
- Safety Features: The inverter includes multiple layers of protection, such as over-temperature, overload, and short-circuit protection. It’s often rated with an IP65 protection degree, making it suitable for outdoor installation.
Typical Technical Specifications (for a 6kW model)
Solar (PV) Input Data:
- Max. PV Power: This is often higher than the nominal output to allow for optimal performance on sunny days. A common value is around 8000W.
- MPPT Voltage Range: The voltage range within which the inverter can efficiently track the maximum power point of the solar panels. A typical range is 120-450V.
- Max. PV Input Voltage: The absolute maximum voltage the inverter can handle, often around 500V.
AC Output/Input Data:
- Nominal Output Power: 6000W (or 6 kVA). This is the continuous power the inverter can supply.
- Nominal Output Voltage: 230V AC (single-phase).
- Nominal Output Frequency: 50 Hz.
- Max. AC Input/Output Current: This depends on the specific model but is typically around 25-30A.
- Efficiency: The maximum efficiency is usually over 97% for the inverter itself and around 94% for battery-to-load conversion.
Battery Data:
- Nominal Battery Voltage: 48V DC.
- Max. Charging/Discharging Current: Can be up to 100A or more, depending on the model.
Physical and Environmental:
- Dimensions and Weight: These vary, but the inverter is typically a wall-mountable unit. Weights are in the range of 15-20 kg.
- Operating Temperature Range: Often between -20°C and 50°C.
R9 995,00 -
Compare
10.2KWH Hybrid Inverter
14.34kwh Lithium Battery
X12 550/600w solar panels
Installation mounting accessories
-Ac breaker
-solar combine box
-roof hooks
-Ac cable
-Tracken
-Rails
-solar cable
-ac cableInstallation
-Mounting solar panels f
-Mounting inverter and battery
-Feeding and separating the dB box
-cocR74 995,00
-
-
-
Compare
X2 10.2KWH Hybrid Inverter
X2 14.34kwh Lithium Battery
X24 550/600w solar panels
Installation mounting accessories
-Ac breaker
-solar combine box
-roof hooks
-Ac cable
-Tracken
-Rails
-solar cable
-ac cableInstallation
-Mounting solar panels f
-Mounting inverter and battery
-Feeding and separating the dB box
-cocR132 995,00 -
Compare
10.2kwh Hybrid Inverter
5.1kwh Lithium Battery
X7 550/600w solar panels
Installation mounting accessories
-Ac breaker
-solar combine box
-roof hooks
-Ac cable
-Tracken
-Rails
-solar cable
-ac cableInstallation
-Mounting solar panels f
-Mounting inverter and battery
-Feeding and separating the dB box
-cocR48 995,00
-
-
-
Compare
Longer Cycle Life: Offers up to 20 times longer cycle life and five times longer float/calendar life than a lead acid battery, helping to minimize replacement cost and reduce the total cost of ownership. Lighter Weight: About 40% of the weight of a comparable lead acid battery. A ‘drop in’ replacement for lead acid batteries. Higher Power: Delivers twice the power of the lead acid battery, even high discharge rate, while maintaining high energy capacity. Wider Temperature Range: -20 C~60 C. Superior Safety: Lithium Iron Phosphate chemistry eliminates the risk of explosion or combustion due to high impact, overcharging, or short circuit situations.
What’s in the box
1 x Ecco Lithium Ion Phosphate 51.2v 100ah 5.120 KWh BatteryR14 500,00 -
CompareSolar Battery – Unlock the Power of Solar Independence with the Dyness BX51100 5.12kWh Lithium Battery
UPGRADED TO 1C
Introducing the Dyness BX51100, a remarkable innovation in renewable energy storage. The BX51100 is a 5.12kWh Lithium-ion solar Battery Module pack equipped with a cutting-edge BMS (Battery Management System) that provides robust protection against overcharging, over-discharging, and short circuits. This powerful battery delivers continuous output power for enhanced performance and unparalleled reliability.
Empower Your Renewable Energy System
The Dyness BX51100 is not just a battery; it’s a solution for those who seek energy independence. Designed to seamlessly integrate with renewable energy sources like solar panels, this 5.12kWh lithium battery stores surplus electricity generated during the day and makes it available when you need it. Say goodbye to reliance on the national grid – with the Dyness BX51100, you’re in control of your power.
Efficiency Meets Reliability
The BX51100 is more than just a robust energy storage solution; it’s a testament to reliability. Its advanced BMS ensures the safety and longevity of the battery, and with 5.12kWh of capacity, it provides you with the perfect power backup. Whether it’s for residential or commercial use, the Dyness solar battery BX51100 is the key to uninterrupted, sustainable energy.
Key Specifications:
- Capacity: 5.12kWh
- Battery Type: Lithium-ion
- Continuous Output Power
- Battery Management System (BMS): Yes
- Protection Features: Overcharging, Over-discharging, Short Circuit Protection
- Cycle Life: Ensuring a long-lasting energy solution
R14 799,00
-
-
-
Compare
Self-designed and self-manufactured LFP cell, pack, and rack to ensure the highest safety.
Thanks to its modular and scalable design, it can be expanded to meet future energy requirements.
More than 5000 cycles with 90% DOD and 10+ years of design life.
Compatible with the most universal hybrid inverters.
Simple rack-mounted structure to reduce the installation time and costR16 995,00
-
-
Compare- X1 16kwh single phase Deye inverterX5 5.1kwh Deye lithium battery
X30 550w canadian panels
Solar combine box
AC combine box
Solar cable
Change over switch
Battery fuses and holder
Claps
Solar mounting
Earth spike
Earth cable
Etc
Installation and coc
R209 495,00 - X1 16kwh single phase Deye inverterX5 5.1kwh Deye lithium battery
-
Compare
General Data
• Colorful touch LCD with IP65 Protection Degree
• AC Couple to retrofit existing Solar System
• Maximum 16 Units Parallel for On-Grid and Off-Grid operation
• Supports Multiple Batteries in Parallel
• Maximum Charging / Discharging Current of 290A
• 6 Time Periods for Battery Charging / Discharging
• Support for storing Energy from Diesel Generator
• Self-Consumption and Feed-In to Grid
• Auto Restart while AC is recovering
• Programmable Supply-Priority for Battery or Grid
• Programmable multiple operation modes: On-Grid, Off-Grid and UPS
• Configurable Battery Charging: Current / Voltage based on applications by LCD Setting
• Configurable AC / Solar / Generator Charger priority by LCD Setting
• Compatible with Mains Voltage or Generator Power
• Overload / Over Temperature / Short Circuit protection
• Smart Battery Charger design for optimized Battery performance
• Limit Function to prevent excess power overflow to the Grid
• Supports WIFI monitoring and 2 Strings of each MPPT
• Smart settable three stages MPPT Charging for optimized Battery performance
• Time-Of-Use Function
• Smart-Load FunctionGRID/AC OUTPUT:
Grid Type: Single Phase
Protection Degree: IP65
Maximum Charge/Discharge Current: 240A
Charging Strategy for Lithium Ion Battery: Self-adaption to BMS
AC Output & UPS Power: 12000W
Maximum AC Output Power: 13200W
AC Output Rated Current: 54.5/52.2
Maximum AC Current: 60/57.4
Maximum Efficiency: 97.60%PV INPUT:
Maximum DC Input Power: 19200W
Max. PV Input Voltage: 500V
Rated PV Input Voltage: 370V
3/2 x MPPT
Start-up Voltage: 125V
PV Input Current: 26A + 26A + 26ABATTERY:
Battery Type: Lead-acid or Lithium-ion (Not Included – Sold Separately)
Battery Voltage Range: 40-60V
Communication with BMS: CAN/RS485R43 450,00
-
-
-
CompareSpecifications and Features :
Max Output Power: 16kW
Input Voltage (VOC): 800V
Battery Compatibility: 48V
Hybrid Functionality: Seamlessly supports on-grid and off-grid power
MPPT Tracking Algorithm: Efficient solar energy utilization
Battery Flexibility: Accommodates up to 5 different batteries
Parallel Connectivity: Connect up to 16 Deye Inverters
Max Charging/Discharging Current: 290A
Adaptive Charging: 6 time periods for optimized battery performance
Energy Source Compatibility: Supports diesel generators and wind turbines
User Interface: High-resolution LCD Touch screen
Retrofit Capability: Compatible with existing solar systems (DC and AC coupling)
Monitoring Options: Web browser and mobile app access
Battery Compatibility: Hybrid functionality for lithium-ion and lead-acid ba
tteries
Warranty: 5 years
R49 500,00 -
Compare- 6kwh Hybrid Inverter
5kwh kwh Lithium Battery
X5 550w solar panels
Installation mounting accessories
-Ac breaker
-solar combine box
-roof hooks
-Ac cable
-Tracken
-Rails
-solar cable
-ac cable
Installation
-Mounting solar panels f
-Mounting inverter and battery
-Feeding and separating the dB box
-cocR199,00 - 6kwh Hybrid Inverter
-
-
-
Compare-
System components:
- 10kWh hybrid inverter
- 15kWh Lithium battery
- 18 x 550W solar panels
- Installation accessories
- Installation
R99 995,00 -
-
Compare- 8kva Sunsynk hybrid inverter
- X2 5.1kwh sun conder lithium batteries
- X9 550w solar panels
- Accessories
- Installation
- Coc
We offer installation nationwide
R97 495,00
-
-
-
Compare
Self-designed and self-manufactured LFP cell, pack, and rack to ensure the highest safety.
Thanks to its modular and scalable design, it can be expanded to meet future energy requirements.
More than 5000 cycles with 90% DOD and 10+ years of design life.
Compatible with the most universal hybrid inverters.
Simple rack-mounted structure to reduce the installation time and costR16 995,00 -
Compare
Longer Cycle Life: Offers up to 20 times longer cycle life and five times longer float/calendar life than a lead acid battery, helping to minimize replacement cost and reduce the total cost of ownership. Lighter Weight: About 40% of the weight of a comparable lead acid battery. A ‘drop in’ replacement for lead acid batteries. Higher Power: Delivers twice the power of the lead acid battery, even high discharge rate, while maintaining high energy capacity. Wider Temperature Range: -20 C~60 C. Superior Safety: Lithium Iron Phosphate chemistry eliminates the risk of explosion or combustion due to high impact, overcharging, or short circuit situations.
What’s in the box
1 x Ecco Lithium Ion Phosphate 51.2v 100ah 5.120 KWh BatteryR14 500,00
-
-
-
Compare
8.5kva Hybrid Inverter
5.1kwh Lithium Battery
X6 550/600w solar panels
Installation mounting accessories
-Ac breaker
-solar combine box
-roof hooks
-Ac cable
-Tracken
-Rails
-solar cable
-ac cableInstallation
-Mounting solar panels f
-Mounting inverter and battery
-Feeding and separating the dB box
-cocR39 995,00 -
Compare
General Data
• Colorful touch LCD with IP65 Protection Degree
• AC Couple to retrofit existing Solar System
• Maximum 16 Units Parallel for On-Grid and Off-Grid operation
• Supports Multiple Batteries in Parallel
• Maximum Charging / Discharging Current of 290A
• 6 Time Periods for Battery Charging / Discharging
• Support for storing Energy from Diesel Generator
• Self-Consumption and Feed-In to Grid
• Auto Restart while AC is recovering
• Programmable Supply-Priority for Battery or Grid
• Programmable multiple operation modes: On-Grid, Off-Grid and UPS
• Configurable Battery Charging: Current / Voltage based on applications by LCD Setting
• Configurable AC / Solar / Generator Charger priority by LCD Setting
• Compatible with Mains Voltage or Generator Power
• Overload / Over Temperature / Short Circuit protection
• Smart Battery Charger design for optimized Battery performance
• Limit Function to prevent excess power overflow to the Grid
• Supports WIFI monitoring and 2 Strings of each MPPT
• Smart settable three stages MPPT Charging for optimized Battery performance
• Time-Of-Use Function
• Smart-Load FunctionGRID/AC OUTPUT:
Grid Type: Single Phase
Protection Degree: IP65
Maximum Charge/Discharge Current: 240A
Charging Strategy for Lithium Ion Battery: Self-adaption to BMS
AC Output & UPS Power: 12000W
Maximum AC Output Power: 13200W
AC Output Rated Current: 54.5/52.2
Maximum AC Current: 60/57.4
Maximum Efficiency: 97.60%PV INPUT:
Maximum DC Input Power: 19200W
Max. PV Input Voltage: 500V
Rated PV Input Voltage: 370V
3/2 x MPPT
Start-up Voltage: 125V
PV Input Current: 26A + 26A + 26ABATTERY:
Battery Type: Lead-acid or Lithium-ion (Not Included – Sold Separately)
Battery Voltage Range: 40-60V
Communication with BMS: CAN/RS485R43 450,00
-
-
-
Compare
- Powerful: 8.5KVA/7.5KW pure sine wave output.
- Efficient: 120A MPPT charge controller, 500V high voltage PV input.
- Reliable: 48V battery system, seamless hybrid operation.
R8 995,00 -
CompareSUN 51.2V 345AH 17.66KWH A-GRADE LITHIUM BATTERY CNY51231RN
Product Features
- Ultra high safe LiFePO4 battery
- Built-in BMS for multiple protection & longer lifespan
- Active balancing function and lower self-consumption
- Lightweight module design for fast installation & easy maintenance
- Parallel up to 16 modules for flexible capacity extension.
- Wide temperature range for more application scenes.
What’s in the box:
- Battery
- Battery Cables
- Warranty Card
- Communication cable
- User Manual
R32 450,00
-
-
-
Compare
Solar Battery – Unlock the Power of Solar Independence with the Dyness BX51100 5.12kWh Lithium Battery
UPGRADED TO 1C
Introducing the Dyness BX51100, a remarkable innovation in renewable energy storage. The BX51100 is a 5.12kWh Lithium-ion solar Battery Module pack equipped with a cutting-edge BMS (Battery Management System) that provides robust protection against overcharging, over-discharging, and short circuits. This powerful battery delivers continuous output power for enhanced performance and unparalleled reliability.
Empower Your Renewable Energy System
The Dyness BX51100 is not just a battery; it’s a solution for those who seek energy independence. Designed to seamlessly integrate with renewable energy sources like solar panels, this 5.12kWh lithium battery stores surplus electricity generated during the day and makes it available when you need it. Say goodbye to reliance on the national grid – with the Dyness BX51100, you’re in control of your power.
Efficiency Meets Reliability
The BX51100 is more than just a robust energy storage solution; it’s a testament to reliability. Its advanced BMS ensures the safety and longevity of the battery, and with 5.12kWh of capacity, it provides you with the perfect power backup. Whether it’s for residential or commercial use, the Dyness solar battery BX51100 is the key to uninterrupted, sustainable energy.
Key Specifications:
- Capacity: 5.12kWh
- Battery Type: Lithium-ion
- Continuous Output Power
- Battery Management System (BMS): Yes
- Protection Features: Overcharging, Over-discharging, Short Circuit Protection
- Cycle Life: Ensuring a long-lasting energy solution
R14 799,00
-
-
-
Compare
10kwh Hybrid Inverter
10kwh kwh Lithium Battery
X9 550w solar panels
Installation mounting accessories
-Ac breaker
-solar combine box
-roof hooks
-Ac cable
-Tracken
-Rails
-solar cable
-ac cableInstallation
-Mounting solar panels f
-Mounting inverter and battery
-Feeding and separating the dB box
-cocOriginal price was: R69 995,00.R66 995,00Current price is: R66 995,00.
-
-
-
Compare
Longer Cycle Life: Offers up to 20 times longer cycle life and five times longer float/calendar life than a lead acid battery, helping to minimize replacement cost and reduce the total cost of ownership. Lighter Weight: About 40% of the weight of a comparable lead acid battery. A ‘drop in’ replacement for lead acid batteries. Higher Power: Delivers twice the power of the lead acid battery, even high discharge rate, while maintaining high energy capacity. Wider Temperature Range: -20 C~60 C. Superior Safety: Lithium Iron Phosphate chemistry eliminates the risk of explosion or combustion due to high impact, overcharging, or short circuit situations.
What’s in the box
1 x Ecco Lithium Ion Phosphate 51.2v 100ah 5.120 KWh BatteryR14 500,00
-
-
Compare
Key Specifications and Features
- Nominal Voltage: 51.2V ⚡️
- Nominal Capacity: 300Ah
- Energy: 15.36kWh
- Chemistry: LiFePO4
- Cycle Life: Over 6,000 cycles, with a designed service life of 15-18 years. This is a crucial metric, as a higher number of cycles means the battery can be charged and discharged more times before its capacity significantly degrades.
- Compatibility: It features a built-in Battery Management System (BMS) that allows it to communicate with most major inverter brands.
- Scalability: The battery has a modular design, which allows you to connect multiple units in parallel to increase your total energy storage capacity as your needs grow.
- Safety Features: The integrated BMS provides protection against common issues like overcharging, over-discharging, over-current, and short circuits.
Original price was: R34 600,00.R29 995,00Current price is: R29 995,00.
-
-
Compare
10kwh Hybrid Inverter
10kwh kwh Lithium Battery
X9 550w solar panels
Installation mounting accessories
-Ac breaker
-solar combine box
-roof hooks
-Ac cable
-Tracken
-Rails
-solar cable
-ac cableInstallation
-Mounting solar panels f
-Mounting inverter and battery
-Feeding and separating the dB box
-cocOriginal price was: R69 995,00.R66 995,00Current price is: R66 995,00.
-
